Dry out the compressed air for the maximum protection of plants
One of the main reasons the production plants go in to halt or stop the production is due to the presence of excessive water vapor in the air or corrosion of the pipelines due to moist air. Halting the production process even for a few minutes can have a devastating effect on the manufacturers. Hence it becomes very important to avoid excessive humidity by all means to avoid damage to the plants. The best solution to such an existing problem is the use of powerful dehumidifiers for the compressed air. Generally, the humidity which is less than 50 percent in the compressed air is thought to be ideal to be passed but it also depends on other various factors. Compressed air that is dry cannot cause corrosion and help the piping work smoothly for a longer period of time.
Click on the following link to read more on Dehumidifiers for Grow Tent.
Effect of plant failures on the maintenance cost
When the production stops from time to time it automatically increases the production cost because it creates supply bottlenecks. Paying extra for the specialist staff for troubleshooting with repairing costs entails huge losses to the company. Hence it is very clear that unexpected failure of plants must be avoided at every cost. The plants must be regularly maintained and the electronic and mechanical parts of the plants must be given special care. Failure to maintain a certain level of climatic condition exposes the machinery parts to the danger of being corroded and damaged. People must pay special attention to the climatic condition of the plants both internally as well as externally.
Drying process of compressed air in a targeted way
More often than not plant failures occur due to corrosion created inside the pipeline system of the plant which is due to excessive amounts of water vapor in the compressed air. Hence high levels of humid compressed air must be avoided at all costs. Compressed air must be dehumidified before it enters the system of the plants for safety reasons. The dehumidifiers from our company are capable of doing a competent job as they are very powerful, effective, and economical.
Relative humidity
When it comes to the relative humidity of compressed air one question has been very persistent; how much is the right humidity? Well, the answer is not as simple as the question. But the general recommendation for humid level is below 50 percent since the air cannot cause corrosion at that level of humidity. This is a safe bait because it means that only 50 percent of air contains moisture which is only half the amount of which it can maximally contain.
Sophisticated solutions
Our line of products is known to be very sophisticated in the industrial line. The desiccant dehumidifiers can absolutely extract moisture as per the desire of the requirement of our customers. Whether you require a normal mobile desiccant dehumidifier or heavy stationary desiccant dehumidifier we have it all. These dehumidifiers are very ideal for heat recovery too. We know the value of the safety of your production plants therefore we provide you with the best expert advice that you can get from the market.
Ambale dehumidification solution suggests Cotes dehumidifiers which are well suited for specific requirements depending on the size of the space and how much of airborne humidity needs to be removed from the present air. These machines are also lightweight and compact machines from Cotes which are recommended by Ambale. Please contact our technical team at Ambale by sending us an email at info@ambale.co.nz
Ambale dehumidifiers are supplied in Auckland, Wellington, Christchurch, Fiji, Suva, Queenstown, and all cities of New Zealand and Fiji.
Ambale believes in providing perfect solutions with great quality and service.
